Polycom GlobalManagementSystem User Manual page 117

Remote Alert Notification
SNMP Configuration
Notification Configuration
Global Management System User's Guide
Message
System(s) is/are not responding
Connectivity problem
System(s) reporting errors
System reporting warnings
System(s) requesting help
NOTE
If your system does not have SNMP, this function will be disabled. You will not be able to
configure the traps for errors that occur in your network. To enable an SNMP agent, install
the Microsoft SNMP from a Windows 2000 or 2003 CD.
Example of Problem
System is off, Network issues, not reachable by IP
Indicates that Global Management System is
able to query the system, but is unable to receive
status updates.
Lost Gatekeeper
The video endpoint cannot find the gatekeeper
that it normally registers with. The gatekeeper
might be in an offline state.
Microphone unplugged
The iPower is detected to have unplugged
microphone from the main unit of the video
endpoint.
Camera unplugged
The iPower is detected to have an unplugged
camera from the main unit of the video endpoint.
Video mode
Major error occurring on MGC unit or in one of the
cards
Low Battery
The battery in the video endpoint remote control is
running low.
Lost Directory Server
The iPower cannot display the Global Directory.
The Directory server may be offline.
Web Server Redirect
Redirect response string (HTTP 3XX) returned
from an Other Device server.
iPower User Interface not running
The iPower user interface is not operating
Minor error occurring on MGC unit or in one of the
cards
User requested assistance
Chapter 8 System Configuration 112