Polycom GlobalManagementSystem User Manual page 183

Appendix
V-Series Admin Setup Menu
System Info :: Admin Setup ::
Dialing Rules
V-Series Field
Number of Digits in
Extension
International Dialing
Prefix
Public Network Access Drop Down
Public Network Dialing
Prefix
Public Network (same
area code) Prefix
Private Network
Access
Public Network (same
area code) Prefix
If Area Code =
Dial Prefix
Always dial area code
Dial 1+ for all USA
calls
Global Management System User's Guide
Global Services
Type Meaning
User Defined Sets the number of digits in the dialing extension.
Value Usually applies to systems that are on a PBX.
User Defined Prefix required to place international calls. This
Value prefix is automatically appended to any international
calls made from the Global Directory. This overrides
the international dialing prefix that is normally set in
the V-Series Country Setup screen.
Enables this system to dial calls outside of your
Menu private network
User Defined Dialing prefix as required by the PBX to dial out
Value to the public network. This prefix is automatically
inserted before the dialing numbers to the public
network from the Global Directory.
User Defined Dialing prefix required by your PBX to dial out to the
Value public network. This prefix is automatically inserted
before the dialing numbers to the public network in
the Global Directory.
Drop Down Enables this system to use a private network for
Menu calls
User Defined Dialing prefix that is used to access an organization
Value from outside the private network
User Defined Area code for configuration
Value
User Defined Set prefixes dialed before the area code
Value
Checkbox Checked - User will need the area code to dial sites
option that have the same local area code as the V-Series.
Checkbox Enable this option if you must dial a "1" before the
Option area code.
Appendix 178