Polycom GlobalManagementSystem User Manual page 189

Appendix
iPower Admin Setup Menu
Admin Tools :: General ::
Monitor
iPower Field
Use second monitor
Picture-in-Picture (PIP)
Position on Second
Monitor
Global Management System User's Guide
Monitor
Type Meaning
Check box Check the box if your system uses a second
monitor. The system automatically sets the second
monitor's type (NTSC or PAL) to match the main
camera type.
Radio button If you are using a second monitor with your system,
you can change the position of the PIP (Picture-in-
Picture) on the second monitor. The default setting
is Bottom Right. Changes to this setting take effect
immediately.
Appendix 184