Factory Reset The Base Station - Snom C620 User Manual

Factory reset

Factory reset the base station

1. Using a paperclip, or something similar, press and hold the reset button on the
back of the base station for 15 seconds.
2. Release the reset button. During the next one to two minutes, the following
occurs:
• The conference phone displays "Please wait".
• The VoIP LED on the base station flashes quickly, then the Power LED and
the VoIP LED flash alternatingly.
• The conference phone beeps once and displays "Out of range or no power at
base".
• The status indicators on the conference phone flash red quickly.
• The conference phone displays the idle screen. This indicates the factory
reset has completed.
57