Table of Contents
Advertisement
5 Installation at Site
5 Installation at Site
5.1 Safety regulations
DANGER
Improper installation in potentially explosive atmospheres
Explosion hazard!
Damage to the pump set!
▷ Comply with the applicable local explosion protection regulations.
▷ Observe the information in the data sheet and on the name plates of pump and
motor.
DANGER
Improper transport
Danger to life from falling parts!
Damage to the pump set!
▷ Use the attachment point provided for attaching the lifting accessory.
▷ Never lift the pump set by the electric cables.
▷ Use the lifting chain/rope included in the scope of supply exclusively for
lowering or lifting the pump set into/out of the pump sump.
▷ Securely attach the lifting chain/rope to the pump and crane.
▷ Use tested, marked and approved lifting accessories only.
▷ Observe the regional transport regulations.
▷ Observe the documentation of the lifting accessory manufacturer.
▷ The load-carrying capacity of the lifting accessory must be higher than the
weight indicated on the name plate of the pump set to be lifted. Take into
account any additional system components to be lifted.
▷ Maintain a safe distance during lifting operations (load may swing when being
lifted).
DANGER
Persons in the intake chamber during pump set operation
Electric shock! Risk of injury!
▷ Never start up the pump set when there are persons in the intake chamber.
WARNING
Impermissible solid objects (tools, screws/bolts or similar) in the pump sump/inlet
tank during pump start-up
Personal injury and damage to property!
▷ Check the pump sump/inlet tank for impermissible solid objects before
flooding, and remove, if necessary.
5.2 Checks to be carried out prior to installation
5.2.1 Checking the structural requirements
All structural work required must have been prepared in accordance with the
dimensions stated in the outline drawing / general arrangement drawing ..
Amacan P
23 of 112
Advertisement
Table of Contents
