1
If included in agreed scope of supply
1 General
1 General
1.1 Principles
This operating manual is valid for the type series and variants indicated on the front
cover.
The operating manual describes the proper and safe use of this equipment in all
phases of operation.
The name plate indicates the type series and size, the main operating data, the order
number and the order item number. The order number and order item number
clearly identify the pump set and serve as identification for all further business
processes.
In the event of damage, immediately contact your nearest KSB service facility to
maintain the right to claim under warranty.
1.2 Installation of partly completed machinery
To install partly completed machinery supplied by KSB refer to the sub-sections under
Servicing/Maintenance.
1.3 Target group
This operating manual is aimed at the target group of trained and qualified specialist
technical personnel. (ð Section 2.3, Page 9)
1.4 Other applicable documents
Table 1: Overview of other applicable documents
Document
Data sheet
Hydraulic characteristic curve
General assembly drawing
Sub-supplier product literature
1)
Spare parts lists
For accessories and/or integrated machinery components, observe the relevant
manufacturer's product literature.
1.5 Symbols
Table 2: Symbols used in this manual
Symbol
Description
Conditions which need to be fulfilled before proceeding with the
✓
step-by-step instructions
⊳
Safety instructions
Result of an action
⇨
⇨
Cross-references
1.
Step-by-step instructions
2.
Note
Recommendations and important information on how to handle
the product
Amacan P
Contents
Description of the technical data of the pump (set)
Characteristic curves showing head,
NPSH required, efficiency and power input
1)
Sectional drawing of the pump set
1)
Operating manuals and other product literature
describing accessories and integrated machinery
components
Description of spare parts
7 of 112