14 of 112
3 Transport/Storage/Disposal
Fig. 2: Pulling the pump set upright with one crane
Fig. 3: Pulling the pump set upright with two cranes
ü Suitable lifting equipment has been selected (e.g. crane).
1. a) For one piece of lifting equipment: Attach the eyehook to the bail of the
pump set.
b) For two pieces of lifting equipment: Attach one eyehook to the bail of the
pump set. Then suitably loop a rope around the pump set and attach this loop
to the second crane hook.
2. Lift the pump set with the lifting equipment.
ð Guiding the pump set over the edge of the bellmouth or pump casing is only
permissible on a wooden base!
ð Protect the power cable against kinking!
3. Place the pump set on a level, clean surface and protect it against tilting, tipping
over or rolling off.
Amacan P