Overriding The Default Display Mode - Planar DOME Md5/DFP Installation Manual

80 | Installing the Board and Driver in a Sun PCI Workstation

Overriding the default display mode

To start CDE or OpenWindows using the default display mode,
skip this section.
When you edit or modify code, type it on one line.
A backslash (\) indicates continuation of the line.
Edit the OWconfig file to override the default display mode and
customize your configuration for OpenWindows or CDE. This
file is located in the /usr/openwin/server/etc directory on
the workstation.
To edit the OWconfig file
1. Check to see if the /etc/openwin/server/etc/OWconfig
file exists on your workstation. If it does not, you must log on
as root and create the missing directories with mkdir .
2. Find and copy these 10 lines of the OWconfig file in
/usr/openwin/server/etc
#class = "XSCREENCONFIG" name="DOMEmd5dfp0Config"
#
#
#
#
#class = "XSCREENCONFIG" name="DOMEmd5dfp1Config"
#
#
#
#
directory.
device="/dev/md5dfp0.0"
res="1536x2048 Panel"
monitor="domegray.vda"
board="md5dfp-2hd.xqa";
device="/dev/md5dfp0.1"
res="1536x2048 Panel"
monitor="domegray.vda"
board="md5dfp-2hd.xqa";