7.
Insert the WINFP CD and browse to the
winnt4\fp.4.4.x.yyy
is a number that completes the driver
x.yyy
version, as in fp.4.4.2.012).
8.
Click OK to select the oemsetup.inf file.
The Change Display dialog box appears with this choice:
DOME imaging systems Md5/DFP
9.
Select DOME imaging systems Md5/DFP, then click OK.
The Third-Party Drivers dialog box appears, prompting you:
Do you wish to proceed?
10.
Click Yes.
A progress bar appears, and the Installing Driver dialog box
appears with this message:
The drivers were successfully installed.
11.
Click OK.
12.
Click Close on the Display Type dialog box and on the
Display Properties dialog box.
The System Settings Change dialog box appears,
prompting you:
Do you want to restart your computer now?
13.
Click Yes.
14.
When the system restarts, select Windows NT Workstation
Version 4.00 [VGA].
15.
Configure your display settings. (See page 44.)
Installing the Windows NT 4.0 Driver | 43
directory (where