Table of Contents
Advertisement
84 | Installing the Board and Driver in a Sun PCI Workstation
To emulate a PseudoColor visual class
Start the X server using PseudoColor as the default visual class
by adding defclass PseudoColor to the openwin command
and to the Xservers file.
For example, for a one-headed system using the Md5/DFP
board, type:
openwin
For a two-headed system using the Md5/DFP board, type:
openwin -dev /dev/md5dfp0.0 defclass PseudoColor \
-dev /dev/md5dfp0.1 defclass PseudoColor
To check the default visual
Use the xdpyinfo command to check the default visual of a
screen. Look at the correct screen and find the visual with the
matching ID to verify that it is PseudoColor .
Look for the lines marked with a right arrow ( ) in this
sample output:
name of display: cole:0.0
version number: 11.0
vendor string: Sun Microsystems, Inc.
vendor release number: 3300
maximum request size: 262140 bytes
motion buffer size: 256
bitmap unit, bit order, padding: 32,
MSBFirst, 32
image byte order: MSBFirst
number of supported pixmap formats: 2
supported pixmap formats:
depth 1, bits_per_pixel 1, scanline_pad 32
depth 8, bits_per_pixel 8, scanline_pad 32
keycode range: minimum 8, maximum 132
focus: window 0x280000d, revert to PointerRoot
-dev /dev/md5dfp0.0 defclass PseudoColor
Advertisement
Table of Contents
