Overriding The Default Monitor Mode - Planar DOME Md4/PCX Installation Manual

Installing the Md4/PCX Board and Driver in a Sun PCI Workstation

Overriding the Default Monitor Mode

To start CDE or OpenWindows using the default monitor
mode, skip this section.
To override the default monitor mode and customize
your configuration for both CDE and OpenWindows,
you must edit the
/usr/openwin/server/etc
Follow these steps to edit the
1. Check to see if the
OWconfig
you must log in as
tories with
2. Find and copy these lines of the
/usr/openwin/server/etc
#class="XSCREENCONFIG" name="DOMEmd4pcx0Config"
#
#
#
#
#
#class="XSCREENCONFIG" name="DOMEmd4pcx1Config"
#
#
#
#
#
3. Paste the copy into the file
etc/OWconfig
already exists, append the copy to the end of the file.
OWconfig
/etc/openwin/server/etc/\
file exists on your workstation. If it does not,
root
.
mkdir
device="/dev/md4pcx0.0"
res="1728x2304 @ 69Hz"
stereo="1024x1024 @ 121Hz"
monitor="domegray.vda"
board="md4pcx-2hd.xqa";
device="/dev/md4pcx0.1"
res="1728x2304 @ 69Hz"
stereo="1024x1024 @ 121Hz"
monitor="domegray.vda"
board="md4pcx-2hd.xqa";
, and edit it there. If the
file. This file is located in the
directory on the workstation.
file:
OWconfig
and create the missing direc-
file in the
OWconfig
directory:
/etc/openwin/server/\
OWconfig
95
file