Table of Contents
Advertisement
3.
Select one of these options, then click Next.
• Update Md5/DFP Driver for Board x to modify the
installed driver, where x is 1 for the first board, 2 for
the second board, and so on. The Setup Type dialog box
appears for each Md5/DFP board you install.
• Add a Display for Board x to add a second display to
an existing board installed as a single head. The Digital
Signature Not Found dialog box appears.
4.
Click Yes.
The Digital Signature Not Found dialog box appears for
each CX display installed.
The End of Driver Installation dialog box appears
upon completion.
5.
Select Yes, I want to restart my computer now, and
click Finish.
6.
Click Finish to close the InstallShield Wizard.
The Md5/DFP driver loads upon system restart in
normal mode.
Installing the Windows 2000 Driver | 23
Advertisement
Table of Contents
