Table of Contents
Advertisement
16 | Installing the Board and Driver in a PC
Installing the Windows 2000 Driver
This procedure assumes the Windows 2000 operating
system is already installed on your computer. If it is not,
refer to the Microsoft Windows 2000 documentation.
Install all DOME boards before you install the driver.
See "Preparing for Board Installation" on page 8 for
instructions. Then restart your system and install the
driver for each board separately.
To install the driver
1.
Turn on the computer, and highlight Microsoft Windows
2000 Professional. Press <F8> during the system boot and
select Enable VGA Mode on the Windows 2000 Advanced
Options menu. Then press <Enter>.
2.
Log on with administrator privileges.
The System Settings Change dialog box appears, indicating
that Windows 2000 recognizes the new hardware device.
3.
Click Yes to restart your computer.
Advertisement
Table of Contents
