Table of Contents
Advertisement
Changing the resolution
The Resolution field of the DOME tab lets you choose the
desired resolution in either portrait or landscape mode.
To change the resolution
1.
Select a resolution, and click Apply.
When you use the DOME tab to set the resolution for one
display of a dual-headed DOME board, the second display
assumes the same resolution.
The DOME Display Resolution dialog box appears.
2.
Click OK within 15 seconds to accept the new settings, or
ignore the message to revert to the original settings.
The resolution changes on both installed screens, and
a message appears prompting you to accept or cancel
the new resolution.
Configuring Display Settings on Windows 2000 | 27
Advertisement
Table of Contents
