Calibration Tqa - Planar DOME Md5/DFP Installation Manual

Display controller

Table of Contents

66 | Installing the Board and Driver in a PC

Calibration TQA

To run the DOME calibration software on a Windows NT system,

use Calibration TQA 2.0.3 or later.

You can run Calibration TQA 2.0.3 or later on a system that

includes both DOME boards and other brands of boards.

Do not change any Windows display settings while the

Calibration TQA application is running. Calibration TQA

and other mdpcint.dll -reliant applications may behave

unpredictably if you make changes while the application

is active.

Table of Contents