Table of Contents
Advertisement
18 | Installing the Board and Driver in a PC
8.
Proceed through the installation (license agreement and
readme files).
The Setup Type dialog box appears.
9.
Select One or Two displays as connected to your Md5/DFP
board, and click Next.
The Setup Type dialog box appears for each Md5/DFP board
you install.
10.
Click Yes on the Digital Signature Not Found dialog box to
continue the installation.
This dialog box appears for each CX display you install.
The End of Driver Installation dialog box then appears
upon completion.
11.
Select Yes, I want to restart my computer now, and
click Finish.
The Md5/DFP driver loads upon system restart.
Advertisement
Table of Contents
