Table of Contents
Advertisement
20 | Installing the Board and Driver in a PC
The Setup Type dialog box appears.
4.
Choose Update Md5/DFP Driver for Board x to modify
the installed driver, where x is 1 for the first board, 2 for the
second board, and so on. Or select Add a Display for Board x
to add a second display to an existing board installed as a
single head. Click Next.
The Setup Type dialog box appears for each Md5/DFP board
you install.
The Digital Signature Not Found dialog box appears.
5.
Click Yes to continue the installation.
The Digital Signature Not Found dialog box appears for
each CX display installed.
The End of Driver Installation dialog box appears
upon completion.
6.
Select Yes, I want to restart my computer now, and
click Finish.
7.
Click Finish on the Maintenance Complete dialog box.
The Md5/DFP driver loads upon system restart.
Advertisement
Table of Contents
