Table of Contents
Advertisement
About This Guide
The Md5/DFP Display Controller Installation Guide contains all
the procedures you need to unpack and install the DOME
Md5/DFP™ display controller (board) and driver.
Before you get started, read this section for an overview of
system requirements, expected users, conventions, guide
organization, and related documentation.
Purpose
This guide explains how to unpack the Md5/DFP board and
install it into these computers:
• PC
• Sun™ PCI workstation
This guide also describes how to install and configure the
DOME drivers for these operating systems:
• Microsoft
• Microsoft Windows NT
• Sun Solaris™ 2.5.1 or later
If you are using the Md5/DFP board to support the DOME C3™
or C5™ digital flat-panel display, make sure you have a copy of
the C3 or C5 Digital Display Installation and Maintenance Guide .
Audience
This guide assumes you are experienced with installing and
configuring hardware and software, and familiar with your
computer and its operating system.
®
®
Windows
2000
®
4.0
ix
®
Advertisement
Table of Contents
