Table of Contents
Advertisement
76 | Installing the Board and Driver in a Sun PCI Workstation
4. To transfer the software packages to the system, type:
pkgadd -d md5fZZZ.pkg
where ZZZ = the revision of the software on the CD.
Check the name of the file on the CD to get the
software revision.
This message appears:
The following packages are available:
1 DOMEmd5f
2 DOMEmdlib
Select package(s) you wish to process (or 'all'
5. Press <Return> to install all packages.
Messages appear, followed by this prompt:
Do you want to continue with the installation of
the package [y,n,?]
6. Type y .
Messages describe the progress of the installation. When
the installation is complete, these messages appear:
Installation of <DOMEmdlib> was successful.
Installation of <DOMEmd5f> was successful.
You do not need to reboot your system unless you did not
boot it with the -r option after you installed the board.
See page 72.
DOME Md5DFP Display Support
(sparc) 1.0.x
DOME MD library
(sparc) 1.2.x
to process all packages).
(default:all) [?,??,q]:
Advertisement
Table of Contents
