Additional Components For Windows Nt; Dynamic Link Library; Dimpl Library; Dimplx Control - Planar DOME Md5/DFP Installation Manual

Display controller

Table of Contents

Additional Components for Windows NT

These additional DOME software components run on

Windows NT systems using the Md5/DFP board.

The mdpcint.dll dynamic link library (DLL) is a group

of functions that can link to DOME applications, such as the

DOME Image-Processing Library and Calibration TQA.

The DLL installs automatically when you load the

Windows NT driver.

The DOME Image-Processing Library, or the DIMPL library,

provides a group of functions for image manipulation. The

library uses the DirectDraw facilities in the Windows NT

4.0 operating systems and works cooperatively with the

DOME driver.

The DimplX control is the ActiveX interface to the DIMPL

library. It provides an easy-to-use interface to the powerful

DIMPL functions. It also uses the DirectDraw facilities in

the Windows NT 4.0 operating system.

Table of Contents