Table of Contents
Advertisement
4 | Planning the Board Installation
Installation Requirements
Before you install the Md5/DFP board, review these installation
requirements to check for all the items you need.
Cross-platform requirements
You can install the Md5/DFP board in a PC or a Sun PCI
workstation. Each platform requires a compatible flat panel
that supports your desired display resolution.
All flat panels on systems running Windows NT 4.0 must
have the same resolution. On systems running Windows 2000
or Solaris, multiple flat panels driven by an Md5/DFP board
must have the same resolution.
Platform-specific requirements
This table lists the platform-specific requirements for system
specifications, operating system, and DOME driver.
Requirements
System specs
Operating system
DOME driver
PC
• PCI slot per board
• 2 MB hard disk space
• 16 MB RAM
• CD-ROM drive
• Windows 2000
• Windows NT 4.0
• Windows 2000 driver
for Md5/DFP board
• Windows NT 4.0 driver
for Md5/DFP board
Sun PCI Workstation
• PCI slot per board
• 500 KB hard disk
space for driver and
DDX installation
• CD-ROM drive
Solaris 2.5.1 or later
Solaris driver for
Md5/DFP board
Advertisement
Table of Contents
