Installing the Md5/PCI Board in a Sun PCI Workstation
Overriding the Default Monitor Mode
To start CDE or OpenWindows using the default monitor
mode, skip this section.
To override the default monitor mode and customize your
configuration for either CDE or OpenWindows, you must
edit the
This file is located in the
directory on the workstation.
To override the default monitor mode
1. Check to see if the
OWconfig
not, you must log in as
directories with
2. Find these lines of the
/usr/openwin/server/etc
#class="XSCREENCONFIG" name="DOMEmd5pci0Config"
#
#
#
#
file.
OWconfig
/usr/openwin/server/etc
/etc/openwin/server/etc/\
directory exists on your workstation. If
.
mkdir
OWconfig
device="/dev/md5pci0.0"
res="2048x2560@ 71Hz"
monitor="dome.vda"
board="md5pci-1hd.xqa";
and create the missing
root
file in
, and make a copy of them:
93