Table of Contents
Advertisement
32 | Installing the Board and Driver in a PC
Setting driver options
Beware that the Disable DirectDraw driver option has specific
conditions which may affect your display.
To disable DirectDraw
In the Driver Options field of the DOME tab, select
Disable DirectDraw. Then click Apply or OK.
Getting information
Information about the flat panel, board, and driver appears on
the lower half of the DOME tab.
Flat panel information includes panel type, serial number, and
on-board temperature (in degrees Celsius). The temperature
reading of a flat panel is given when you first open the panel
and if you later select it. The revision numbers of the micro-
controllers are also included.
General information includes driver version, library version, and
board type.
Advertisement
Table of Contents
