Connecting The Display - Planar EX2 Quick Reference Manual

2

Connecting the Display

Use only the cables and power cord supplied with your display.
To connect the display
1 Plug one end of the DVI signal cable to
the DVI port on the display. Tighten the
thumbscrews to secure the connection.
2 Plug the power cord into the power
connector on the connector plate.
3 Plug the other end of the DVI cable into the
video port on the installed EX2 controller.
Use DVI port #1 if you are installing only
one display.
4 Plug the other end of the power cord into
a grounded outlet.
5 Power on your display first, then
the computer.
EX2 controller
installed
DVI cable
Connection
for a single
display
5