Windows 2000 Driver
Install all DOME boards first, then restart your system
before you install the driver initially.
Installing the Driver
Windows XP: The M2/PCI board also supports the
Windows XP operating system. To install the driver for
an XP system, follow the instructions for installing the
Windows 2000 driver using your operating system.
To install the driver
1
Highlight Microsoft Windows 2000 Professional at
startup. Press <F8> during the system boot and select
Enable VGA Mode on the Windows 2000 Advanced
Options menu. Then press <Enter>.
2
Log on with administrator privileges.
The InstallShield Wizard reports that it has found
new hardware. Click Cancel.
3
Insert the WINM2 CD, and open 63-WINM2-xxx
(where xxx is a version number).
4
Browse the CD to find the
directory.
Win2k\M2pci
11