Table of Contents
Advertisement
Installing the PCV Windows 2000 Driver
This procedure assumes the Windows 2000 operating system
is already installed on your computer. If it is not, refer to the
Microsoft Windows 2000 documentation.
Read this important information before you install the DOME
Windows 2000 driver:
• Install all DOME boards before you install the DOME
driver. See "Installing the Md4/PCV Board" on page 11
for instructions.
• Restart your computer after installing the boards, and then
install the DOME driver for each board. See "To install the
driver for an additional board" below for instructions.
To install the driver
1.
Turn on the computer, and start Microsoft Windows 2000
Professional.
2.
Log on as administrator.
The Systems Settings Change dialog box may appear. If it
does, click Yes to restart the computer, and log on with
administrator privileges.
3.
Insert the WINDRIVER CD and browse to find the
win2k\MdXPCX
Setup.exe application.
The Setup.exe file is an InstallShield Wizard that
guides you through the installation process.
Installing the PCV Windows 2000 Driver | 41
directory. Then double-click the
Advertisement
Table of Contents
