Installing The Pci Windows 2000 Driver - Planar DOME Md5/PCI Installation Manual

56

Installing the PCI Windows 2000 Driver

Before you install the DOME Windows 2000 driver, make
sure these components are installed on your system:
• Windows 2000 operating system
• DOME board capable of supporting VGA display or any
VGA board
Only system administrators should perform the driver
installation procedures described in this section.
Install all DOME boards before you install the driver.
See "Installing the Board in a PC" on page 21 for instruc-
tions. Then restart your system and install the driver for
each board individually. See "To install the driver" on
page 70 for instructions.
Chapter 2