Storage; Tightening Torque For Nut And Bolt; Connections - PRONAR T669 Operator's Manual

SECTION 5
• Observe environmental protection principles and wash trailer in a place
designated for such purpose.
• Washing and drying trailer must take place at temperatures above 0°C.
• After washing and drying, trailer should be greased at all control points regardless
of last lubrication period.

5.9 STORAGE

• Trailer should be kept in closed or roofed building.
• If the machine will not be used for a long time, it is essential to protect it from
adverse weather, especially rust and accelerated tyre deterioration. During this
time trailer must be unloaded. Trailer should be very carefully washed and dried.
• Corroded places should be cleaned of rust, degreased and protected using
undercoat paint and then painted with surface paint according to colour scheme.
• In the event of prolonged work stoppage, it is essential to lubricate all elements
regardless of the period of the last lubrication process.
• Wheel rims and tyres should be carefully washed and dried. During longer
storage of unused trailer it is recommended that every 2 to 3 weeks the machine
may be moved a bit so that the place of contact of tyres with ground is changed.
The tyres will not be deformed and maintain proper geometry. Also tyre pressure
should be inspected from time to time, and if necessary pressure should be
increased to appropriate value.
• If trailer is equipped with tarpaulin it should be carefully washed and dried. If
possible clean tarpaulin should be stored unrolled, otherwise carefully roll it not
causing crushing and breaking of material.

5.10 TIGHTENING TORQUE FOR NUT AND BOLT

CONNECTIONS

Unless other tightening parameters are given, during maintenance repair work apply
appropriate torque to tightening nut and bolt connections. Recommended tightening torque of
5.35
Pronar T669