Check Wheel Axle Bearings For Slackness - PRONAR T386 Operator's Manual

Pronar T386
ATTENTION!
Minimum thickness of trailer brake linings is 5 mm.
Check brake shoe linings for wear through the inspection opening (2) – see Figure (5.1).
Check brake shoe linings for wear:
FIGURE 5.1 Checking brake shoe linings
(1) wheel axle drum, (2) brake shoe linings for wear inspection opening

5.2.4 CHECK WHEEL AXLE BEARINGS FOR SLACKNESS

Preparation procedures
Hitch trailer to tractor, immobilize tractor with parking brake.
Park tractor and trailer on hard level ground.
• every 3 months,
• if brakes overheat,
• if brake cylinder piston stroke is significantly longer,
• if there are unusual noises from the drum of wheel axle.
Tractor must be placed to drive forward.
5.4
SECTION 5