Connect The Cat5 Cable; Figure 14- Connect The Cat5 Cable Between The Local And Remote Units - NTI XTENDEX ST-C5USBVA-300M Installation And Operation Manual

Connect the CAT5 cable

Connect the CAT5 cable to the "CAT5" port on the front of the Local Unit (see Figure 14). When properly inserted the
cable end should snap into place. Connect the other end of the cable to the "CAT5" port on the Remote Unit.
WARNING: Never connect the ST-C5USBV-300M Extender to an Ethernet card, Ethernet router hub or switch
!
or other Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet may
result.
NTI
R
R
XTENDEX
USB
ST-C5USBVA-300M
LOCAL UNIT
CAT5 Cable- up to 300 feet
CAT5
Connect Local unit to either
rackmount Remote Unit module
(ST-C5USBVA-R-300M) or
desktop Remote Unit
(ST-C5USBVA-R-300)
ST-C5USBVA-R-300 Remote Unit
(Front View)
Yellow CommunicationLED
Green Power LED
-OR-

Figure 14- Connect the CAT5 cable between the Local and Remote Units

-
+
NTI
Network Technologies Inc
XTENDEX
USB
14
R
ST-C5USBVA-R-300M
Remote Unit
(Front View)
NTI
R
XTENDEX
ST-C5USBVA-300M
REMOTE UNIT
MAC
CAT5
R
USB