Connect The Cat5 Cable; Figure 4- Connect Stereo Speakers To Xtendex Local Unit With Audio Support; Figure 5- Connect The Cat5 Cable To The Local Unit - NTI XTENDEX ST-C5USBVA-300M Installation And Operation Manual

3. If the Local Unit has audio support (ST-C5USBVA-300) , connect the cable from the local self-powered
stereo speakers to the 3.5mm stereo audio "AUDIO OUT" jack on the Local Unit. (See Figure 4)
4. If the Local Unit has 2-way audio support (ST-C5USBV2A-300), connect a microphone to the pink jack labeled
"MIC IN".

Figure 4- Connect stereo speakers to XTENDEX Local Unit with audio support

Connect the CAT5 Cable

Connect the CAT5 cable to the "CAT5" port on the rear of the
Local Unit (see Figure 5). (If an RJ45 wall outlet is being used,
connect the other end of the extension cable to it.) When
properly inserted the cable end should snap into place.
ST-C5USBV-300 (Local Unit)
(Front View)
CAT5 Cable to
Remote

Figure 5- Connect the CAT5 cable to the Local Unit

8
-
+
NTI
R
Network Technologies Inc
XTENDEX
USB