Rackmount Modules (Optional); Mount The St-C5Rck-12 Rackmount Extender Module Tray; Figure 9- Mount St-C5Rck-12 Extender Module Tray To A Rack; Figure 10- Secure Each Module To The Tray - NTI XTENDEX ST-C5USBVA-300M Installation And Operation Manual

Rackmount Modules (optional)

If ST-C5USBV-300M or ST-C5USBVA-300M XTENDEX rackmount modules (Local and/or Remote modules) are being installed,
then an ST-C5RCK-12 Rackmount Extender Module Tray must be used (sold separately) to mount the modules to a RACK.
ST-C5RCK-12 provides a convenient mounting method for up to 12 Local and /or Remote XTENDEX modules.
Note: Rackmount Local modules are compatible with rackmount Remote modules or desktop Remote units.

Mount the ST-C5RCK-12 Rackmount Extender Module Tray

1. The ST-C5RCK-12 Rackmount Extender Module Tray was designed to be directly mounted to a rack. It includes a mounting
flange to make attachment easy.
2. Install 4 cage nuts (supplied) to the rack in locations that line up with the holes in the mounting flange on the tray.
Then secure the tray to the rack using four #10-32 screws (supplied). Be sure to tighten all mounting screws securely.
3. Slide each module into the tray and line up the holes in the mounting plate on the module with corresponding holes in the tray.
Secure the module(s) using the two screws provided. Blank plates and screws are provided to cover empty module spaces.
Frontview of ST-C5RCK-12 with XTENDEX Extender Modules
NTI NTI
R R
XTENDEX R XTENDEX R XTENDEX
USB USB
ST-C5USBVA-300M ST-C5USBVA-300M ST-C5USBVA-300M
LOCAL UNIT LOCAL UNIT
CAT5 CAT5
10-32
Rack Screws
(supplied)

Figure 9- Mount ST-C5RCK-12 Extender Module Tray to a rack

NTI
R
R
USB
LOCAL UNIT
CAT5
Secure XTENDEX module(s) to the ST-C5RCK-12
using the screws provided.

Figure 10- Secure each module to the tray

11
Rack
Cage Nuts
(supplied)
The