Table of Contents
Advertisement
MAC Mode
MAC Mode enables the user to connect the Local Unit to a MAC CPU. MAC Mode configures the Local Unit for passing mouse
information to the MAC CPU. This is useful when the user wants to use mouse drivers provided by the mouse vendor, which
allows the use of programmable functions for each mouse button. The Local Unit can be configured whenever necessary.
NOTE: When the port is connected to a PC or SUN CPU, MAC Mode should be OFF (the default setting).
To do this;
1.
Enter Command Mode. (Simultaneously press the left and right <Shift> keys on the keyboard connected to the Remote
Unit. The keyboard LEDs will illuminate. )
2.
If a MAC CPU is connected, press the <M> key. The keyboard LEDs will momentarily flash and the "MAC" LED on the
Remote Unit will illuminate to indicate MAC Mode is ON. (See Figure 16)
3.
To reconnect the XTENDEX to a SUN or Windows CPU (the default setting) , press the <M> key once again and the
"MAC" LED will go OFF.
After setting, the configuration is stored in memory and will be retrieved whenever the XTENDEX is powered ON.
Note: MAC Mode can only be enabled from the keyboard connected to the Remote Unit.
ST-C5USBV-300
Remote Unit
(Rear View)
MAC port configuration LED
Figure 16- MAC LED
17
Advertisement
Table of Contents
