Materials - NTI XTENDEX ST-C5USBVA-300M Installation And Operation Manual

MATERIALS

Materials supplied with the ST-C5USBV-300(M):

NTI ST-C5USBV-300(M) USB KVM Extender Local Unit

NTI ST-C5USBV-300(M) USB KVM Extender Remote Unit

2-120VAC or 240VAC 50 or 60Hz-9VDC/1A AC Adapters

Power supply mounting bracket (ST-C5USBV-300M or ST-C5USBVA-300M only)
Materials supplied with the ST-C5USBVA-300(M):

NTI ST-C5USBVA-300(M) USB KVM and Audio Extender Local Unit

NTI ST-C5USBVA-300(M) USB KVM and Audio Extender Remote Unit

2-120VAC or 240VAC 50 or 60Hz-9VDC/1A AC Adapters

Power supply mounting bracket (ST-C5USBV-300M or ST-C5USBVA-300M only)
Materials supplied with the ST-C5USBV2A-300:

NTI ST-C5USBV2A-300 USB KVM and 2-Way Audio Extender Local Unit

NTI ST-C5USBV2A-300 USB KVM and 2-Way Audio Extender Remote Unit

2-120VAC or 240VAC 50 or 60Hz-9VDC/1A AC Adapters

1- SA-3-MM 3 Foot Audio Cable with 3.5MM Stereo Audio Plugs
Additional materials may need to be ordered, depending upon the configuration:

Video adapter for connection between the Local and a non-VGA SUN CPU (13W3M-15HDF)

USBVEXT-3, 6, 10 (15HD Male-to-Female and USB Type A Male-to-Female Extension cable) if the Local Unit will be located
further than 15" from the CPU or KVM switch

CAT5/5e shielded/unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc.
(see pg. 21 for proper EIA/TIA 568B wiring method)
-OR-
CAT6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1,
etc. (see pg. 21 for proper EIA/TIA 568B wiring method)
For Rackmount Modules (ST-C5USBV-300M or ST-C5USBVA-300M) the following materials are required- not supplied:

UMTINT-xx-MM - male 26-PIN SCSI II to male 15-pin HD, male USB Type A- for connecting the Local Unit to a CPU-
available in 3, 6 and 10 foot lengths.

UMTINT-xx-male 26-PIN SCSI II to female 15-pin HD, female USB Type A (x2)- for connecting the Local or Remote Unit to a
monitor, keyboard, and mouse- available in 3, 6, 10 and 15 foot lengths.

UMATINT-xx-MM-male 26-PIN SCSI II to male 15-pin HD, male USB Type A, and 3.5mm stereo plug- for connecting the
Local Unit with audio support to a CPU- available in 3, 6 and 10 foot lengths.

UMATINT-xx-male 26-PIN SCSI II to female 15-pin HD, female USB Type A (x2), and 3.5mm stereo jack- for connecting the
Local or Remote Unit with audio support to a monitor, keyboard, mouse, and stereo speakers- available in 3, 6, 10 and 15
foot lengths.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-742-8324 (800-RGB-TECH) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com
3
and we will be happy to be of assistance.