NTI XTENDEX Series Installation And Operation Manual
  1. Manuals
  2. Brands
  3. NTI Manuals
  4. Extender
  5. XTENDEX Series
  6. Installation and operation manual

NTI XTENDEX Series Installation And Operation Manual

Xtendex series 600 foot extenders kvm extenders
Hide thumbs Also See for XTENDEX Series:
Table of Contents

Advertisement

Quick Links

Download this manual
XTENDEX
600 FOOT EXTENDERS
Installation and Operation Manual
ST-C5KVM-600M
PS/2 KVM Extender
®
Series
ST-C5KVM-600
PS/2 KVM Extender
VMCTINT-3-MM
(sold separately)
Man014 Rev. 6/26/09

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XTENDEX Series and is the answer not in the manual?

Questions and answers

Related Manuals for NTI XTENDEX Series

Summary of Contents for NTI XTENDEX Series

  • Page 1 ® XTENDEX Series 600 FOOT EXTENDERS Installation and Operation Manual ST-C5KVM-600 PS/2 KVM Extender VMCTINT-3-MM ST-C5KVM-600M (sold separately) PS/2 KVM Extender Man014 Rev. 6/26/09...
  • Page 2 Note: CAT5 connection cable used between NTI XTENDEX Series Local and Remote or any XTENDEX Series products should not be run underground, outdoors or between buildings. WARNING: Outdoor or underground runs of CAT5 cable could be dangerous and will void the warranty.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Introduction..................................1 Materials ..................................2 Features and Functions..............................4 Limitations ..................................6 Preparation for Installation .............................. 6 Installation ..................................7 Installing The Local Unit (models with VGA video connectors).................. 7 Installing The Local Unit (models with S-Video connectors) ..................9 Installing the Local Unit (models with only KM connectors) ..................

  • Page 4: Introduction

    NTI XTENDEX 600 Foot Extenders INTRODUCTION The XTENDEX Series CAT5 Extender (XTENDEX) is designed to enable one CPU to be controlled by two users, one local and one remote. The remote user can be located as much as 600 feet away from a PS/2 CPU via Category 5 unshielded twisted- pair cable.

  • Page 5: Materials

    (i.e. VMCTINT-xx) will be needed. Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.
  • Page 6 NTI XTENDEX 600 Foot Extenders FEATURES AND FUNCTIONS Network Technologies Inc XTENDEX (Front View) (Rear View) ST-C5KVMRS-600 Local Unit Network Technologies Inc XTENDEX (Front View) (Rear View) ST-C5KVMA-600 Local Unit Network Technologies Inc XTENDEX (Front View) (Rear View) ST-C5SVA-600 Local Unit...

  • Page 7: Features And Functions

    NTI XTENDEX 600 Foot Extenders FEATURES AND FUNCTIONS Green LED- traffic indicator- illuminates when there is communication between the local and remote units. Yellow LED- power indicator- illuminates when power has been supplied to the unit Cat 5- RJ45 female- for connecting the CAT 5 cable 4a.
  • Page 8 NTI XTENDEX 600 Foot Extenders Network Technologies Inc XTENDEX (Front View) (Rear View) ST-C5SVA-600 Remote Unit Network Technologies Inc XTENDEX (Front View) (Rear View) ST-C5KVMRS-600-SCI Remote Unit Network Technologies Inc XTENDEX (Front View) (Rear View) ST-C5KM-600 Remote Unit USER USER...

  • Page 9: Limitations

    Note: CAT5 connection cable used between NTI XTENDEX Series Local and Remote or any XTENDEX Series products should not be run underground, outdoors or between buildings.

  • Page 10: Installation

    NTI XTENDEX 600 Foot Extenders INSTALLATION Installing The Local Unit (models with VGA video connectors) 1. Plug the cables of the Local Unit into the back of the CPU. (See Figure 1.) Connect the blue 15HD cable end to the VGA port on the back of the CPU.

  • Page 11: Figure 2- Connect The Local Unit With Audio Support To The Cpu

    NTI XTENDEX 600 Foot Extenders (PURPLE-KEYBOARD) (GREEN-MOUSE) AUDIO CONNECTOR Network Technologies Inc XTENDEX line (BLUE- VIDEO) ONE WILL BE MARKED "line out" ,"spkr", "headphones" OR WITH THIS SYMBOL (BLACK- AUDIO) PS/2 CPU ST-C5KVMA-600 Local Unit (Front View) 3.5mm Stereo Plug...

  • Page 12: Installing The Local Unit (Models With S-Video Connectors)

    NTI XTENDEX 600 Foot Extenders If the Local Unit has RS232 support, connect the local user's RS232 cable from a touch screen monitor to the 9D male port on the Local Unit. If the Local Unit has audio support, connect the cable from the local speakers to the 3.5mm stereo audio jack on the Local Unit.

  • Page 13: Installing The Local Unit (Models With Only Km Connectors)

    NTI XTENDEX 600 Foot Extenders Make connections for a Local User (see Figure 6) Connect one end of an SVEXT-xx-MM cable to the s-video port on the display. Connect the other end of the same SVEXT-xx-MM cable to the s-video port on the Local Unit.

  • Page 14: Connect The Cat5 Cable

    NTI XTENDEX 600 Foot Extenders Connect The CAT5 Cable Rear View of Local Unit Connect the CAT5 cable to the “Cat 5” port on the Local Unit. (See Figure 8.) When properly inserted the cable end should snap into place.

  • Page 15: Figure 9- Connect The Extended Components To The Remote Unit

    NTI XTENDEX 600 Foot Extenders ST-C5KVMRS-600 Remote Unit (Front and Rear View) 9D Male RS232 Connector Front View of Remote Unit Rear View of Remote Unit 15HD Female Video Connector Network Technologies Inc XTENDEX 6 pin miniDIN Female Connector Multi-Scan...

  • Page 16: Installing The Remote Unit (Models With S-Video Connectors)

    NTI XTENDEX 600 Foot Extenders Installing The Remote Unit (models with S-Video connectors) Position the Remote Unit such that the CAT5 cable, the s-video cable, speaker cable, and the AC adapter power connector can each reach the Remote Unit without putting strain on the cables.

  • Page 17: Installing The Remote Unit (Models With Only Km Connectors)

    NTI XTENDEX 600 Foot Extenders Installing The Remote Unit (models with only KM connectors) Position the Remote Unit such that the CAT5 cable, the keyboard cable, mouse cable and power supply cable can each reach the Remote Unit without putting strain on the cables.

  • Page 18: Plug-In And Boot Up

    NTI XTENDEX 600 Foot Extenders Plug-in and Boot Up Plug the power cord from the monitor into the power outlet. Connect each AC adapter power connector to the 9VDC ports on the Remote and Local Units Plug each AC adapter into a power outlet.

  • Page 19: Rackmount Modules (Optional)

    NTI XTENDEX 600 Foot Extenders Rackmount Modules (optional) If ST-C5-600M Series XTENDEX rackmount modules (Local and/or Remote modules) are being installed, then an ST-C5RCK-12 Rackmount Extender Module Tray must be used (sold separately) to mount the modules to a RACK.

  • Page 20: Figure 17- Secure Each Power Supply To The Tray

    NTI XTENDEX 600 Foot Extenders Rearview of ST-C5RCK-12 with XTENDEX Extender Modules Plug power connector USER into Extender module 1.5 A 1275 Danner Dr Aurora, OH 44202 Tel:330- 562 - 7070 Fax:330- 56 2- 1999 www.networkt echi nc.com ST-C 5USB VA- 30 0M...

  • Page 21: Connect The Cpu

    NTI XTENDEX 600 Foot Extenders Connect the CPU Connect a cable between the Local Unit and the CPU. Use the appropriate cable for the application (see chart below). Figure 18 shows the proper connections for the ST-C5KVMA-L-600M using a VMATINT-xx-MM cable (xx= 3, 6, 10, 15 or 25 foot length).

  • Page 22: Connect The Devices

    NTI XTENDEX 600 Foot Extenders Connect the Devices Connect a cable to the monitor, keyboard, mouse, speakers (if supported), and touch screen RS232 cable (if supported) and then to the Local or Remote Unit at the connector marked “USER”. Figure 19 shows the proper connections for the ST-C5KVMA-R- 600M (remote unit) using a VMATINT-xx cable (xx=3,6,10,15 or 25 foot length).

  • Page 23: Connect The Cat5 Cable

    NTI XTENDEX 600 Foot Extenders Connect the CAT5 cable Connect the CAT5 cable to the “CAT5” port on the front of the Local Unit (see Figure 20). When properly inserted the cable end should snap into place. Connect the other end of the cable to the “CAT5” port on the Remote Unit.

  • Page 24: Plug-In And Boot Up

    NTI XTENDEX 600 Foot Extenders Plug-in and Boot Up Plug the power cord(s) from the monitor(s) into power outlet(s). Connect the AC adapter power connectors to the 9VDC ports on the Remote and Local Units. (AC adapter shown in Figure 21) Plug the AC adapters into power outlets.

  • Page 25: Video Quality

    NTI XTENDEX 600 Foot Extenders VIDEO QUALITY Automatic Video Quality Adjustment (see chart on page 1) Video quality adjustment is done automatically to assure the image is as clear as possible. Note: When the cable is longer than 300 feet some colored lines can be seen at the black-to-white transitions. This is a normal behavior and is caused by the different twisting rates of each pair of wires in the CAT5 cable.

  • Page 26: Technical Specifications

    NTI XTENDEX 600 Foot Extenders TECHNICAL SPECIFICATIONS Models with VGA Video Video Compatibility SVGA, XGA, VGA Video Coupling Video Connectors HD15 male to CPU HD15 female to monitor Input / Output Impedance 75 Ohms Input Horizontal Frequency Range 15kHz to 130 Hz...

  • Page 27: Interconnection Cable Wiring Method

    NTI XTENDEX 600 Foot Extenders INTERCONNECTION CABLE WIRING METHOD The connection cable between the remote and local is terminated with RJ45 connectors and must be wired according to the EIA/TIA 568 B industry standard. Wiring is as per the table and drawing below.

  • Page 28: Index

    A return authorization number is required for all repairs/returns. Note: CAT5 connection cable used between NTI XTENDEX Series Local and Remote or any XTENDEX Series products should not be run underground, outdoors or between buildings.

This manual is also suitable for:

St-c5kvm-600St-c5kvm-600m

Table of Contents