Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 87

WMT5DX取扱説明書_EN.indb 85
4
Secure the lAN cable (10 m) with the snap-in tie.
5
Open the arm of the locking clamp, pass the lAN cable (10 m) through the clamp, and close the
arm.
Snap-in tie
6
Attach the service door.
z Check the shape of the lAN cable connectors and insert them with the proper z
alignment.
z Insert the LAN cable connectors firmly. If a connector becomes loose, communication z
will not operate properly.
z Secure the LAN cable firmly with the locking clamp and snap-in tie so that the LAN z
port of the game pC board will not be damaged even if the lAN cable is pulled.
z Clamp the harnesses and LAN cables with sufficient leeway so that they are not z
stretched and there is no excessive load applied.
8A. Installation and Assembly
- Must be performed by a technician -
Game PC board
LAN cable (10 m)
Locking clamp
1
2
3
4
5
6
7
8A
8B
9
10
11
Locking clamp
12
85
16/03/22 19:54