Adjustments After Parts Replacement (Go To I/Finitialize) - Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual

Driver cabi
Table of Contents

Advertisement

7. Operation
7-9
Adjustments after parts replacement (GO TO I/F
INITIAlIZE)
68
WMT5DX取扱説明書_EN.indb 68
z be sure to perform the following initialization process after replacing the game pC
z
board, steering assembly interface or pedal assembly interface, or after initializing
the backup data. The game will not play properly without performing this initializa-
tion.
z After initializing the analog interfaces, the SWITCH TEST screen (see "7-8-6 (a)
z
SWITCH TEST" on page 47) appears. Make sure that OK is displayed on the screen
when the steering wheel, accelerator pedal and brake pedal are operated.
1
Set the Test switch to ON and select I/O TEST in the MENU screen. (See "7-8-6 Input/Output
Test of Switches (I/O TEST)" on page 46.)
2
In the I/O • TOUCH PANEL TEST screen, select GO TO I/F INITIALIZE. The following screen
appears.
3
Set the steering wheel to the center position, release your hands from the steering wheel, and
also release your feet from the accelerator and brake pedals.
(* Initialization will not be completed successfully if the steering wheel or the accelerator or brake
pedals are operated.)
4
In this condition, press the Enter switch.
The analog interfaces will be initialized.
5
After the initialization is complete, the SWITCH TEST screen (see "7-8-6 (a) SWITCH TEST"
on page 47) appears. Turn the steering wheel fully to the right and then fully to the left, and
make sure that rIGHT OK and lEFT OK are displayed on the screen.
6
Fully depress the accelerator pedal and then the brake pedal, and make sure that OK is displayed
on the screen for each.
7
Flip the Select switch up and press the Enter switch to return to the I/O • TOUCH PANEL TEST
screen.
I/F INITIALIZE (DRIVER UNIT)
         STEERING  +031
         GAS 
         BRAKE  
DO NOT TOUCH PEDALS.
"CENETER THE STEERING WHEEL, THEN PRESS ENTER
SWITCHWHEEL POSITION WILL BE SET AS DEFAULT"
CONTINUE SWITCH TEST
ENTER SWITCH: INITIALIZE / CONFIRM
I/F INITIALIZE screen
  030
 000
16/03/22 19:54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents