Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 116

8b. Service
- Must be performed by a technician -
z To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
z
circuits, be sure to turn off the power switch before starting work.
<To remove>
Edge support
<To install>
114
WMT5DX取扱説明書_EN.indb 114
z pC boards are sensitive to static electricity. If a person handles a pC board while z
charged with static electricity, the parts on the pC board may be damaged. before
handling a pC board, discharge the static electricity from your body; for example, by
touching the surface of grounded metal.
1
Turn off the power switch. (See "7-6-1 Turning the power Switch On" on page 31.)
2
remove the service door. (See "8B-3-2 (1) removing and Installing the Service Door" on page
106.)
3
Disconnect the four connectors.
4
Open the levers at the tips of the four edge supports, and replace the D2 Amp pC board.
D2 Amp PC board
5
To install, align the holes of the D2 Amp pC board with the edge supports, and press in the pC
board firmly until it clicks into place.
z After replacement, be sure to check the D2 Amp pC board connections. (See "7-8-8 z
volume Adjustment (SOUND TEST)" on page 51.)
Connect the connecters to the D2 Amp PC board connectors
with the same marking color.
D2 Amp PC board
Connector
16/03/22 19:54