1-2 Removing The Monitor Assembly - Must Be Performed By A Technician - Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual

8A. Installation and Assembly
- Must be performed by a technician -
8A-1-2 removing the Monitor Assembly
z The monitor assembly weighs approximately 90 kg. To prevent accidents when removing the signboard
z
assembly, use four or more people and secure sufficient work space.
Connector
78
WMT5DX取扱説明書_EN.indb 78
1
remove the signboard assembly. (See "8A-1-1 removing the Signboard Assembly" on page
76.)
2
remove the service door. (See "8B-3-2 (1) removing and Installing the Service Door" on page
106.)
3
Disconnect the six connectors.
* place the disconnected connectors inside the underbox assembly.
- Must be performed by a technician -
Connector
16/03/22 19:54