Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 144

8b. Service
- Must be performed by a technician -
142
WMT5DX取扱説明書_EN.indb 142
6
Disconnect the connector.
Connector
Micro switch
(for gears 1, 3 and 5)
* The micro switch for gears
2, 4 and 6 is on the opposite side.
7
remove the two phillips pan head screws (M2.6 x 10), and replace the micro switch.
Micro switch
Phillips pan head screw (M2.6 x 10)
8
To install, perform the procedure in reverse.
z After replacement, be sure to check the switch operation.
z
(See "7-8-6 Input/Output Test of Switches (I/O TEST)" on page 46.)
16/03/22 19:55