Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 152

8b. Service
- Must be performed by a technician -
150
WMT5DX取扱説明書_EN.indb 150
4
rotate the pedal and remove it from the pedal plate.
Pedal
z The analog interface is easily damaged, so be careful not to bump the analog z
interface when removing the pedal.
5
Remove the two Phillips pan head screws (with flat and split washers) (M3 x 5), remove the
fastener, and replace the boot.
Fastener
6
To install, perform the procedure in reverse.
z When inserting the pedal during installation, push in the pedal so that the base of the
z
boot is aligned with the hole in the pedal plate.
Pedal plate
Pedal plate
Phillips pan head screws
(with flat and split washers)
(M3 x 5)
Align the boot with the rectangular
hole in the pedal plate.
16/03/22 19:55