Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 59

 Displayed message list
rUNNING IC CArD r/W HArDWArE TEST
plEASE SElECT AND CONFIrM "STArT TEST"
TESTING IC CArD r/W HArDWArE
plEASE SCAN A COMpATIBlE CArD
TO CANCEl THE TEST, prESS THE ENTEr SWITCH
NOW CHECKING
plEASE WAIT A MOMENT
IC CArD r/W HArDWArE TEST COMplETED
NOrMAllY
E (Error code) (Error title)
CArD COUlD NOT BE rEAD ACCUrATElY
WMT5DX取扱説明書_EN.indb 57
Message
Displayed before starting the IC card r/W hardware test.
The machine stands by in the read status.
To cancel the test, press the Enter switch.
The data check operation is in process. Wait until the
check operation is completed.
The IC card r/W hardware test ended successfully.
Displays the error contents in case of an error. For the
error contents, see "8B-2-10 Error Display" on page 99.
Displayed when the card could not be read because it
was touched to the machine too quickly, etc.
This message appears for 5 seconds, then the
message display returns to "TESTING IC CArD r/W
HArDWArE. plEASE SCAN A COMpATIBlE CArD".
7. Operation
Description
1
2
3
4
5
6
7
8A
8B
9
10
11
12
57
16/03/22 19:54