Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 111

WMT5DX取扱説明書_EN.indb 109
7
Remove the six Phillips pan head screws (with flat and split washers) (M4 x 8), and remove the
rack base.
Rack base
8
Remove the two Phillips pan head screws (with flat and split washers) (M4 x 8), and remove the
cable stay.
9
replace the game pC board, and then install the rack base and game pC board by reversing
the procedure.
z When the game pC board is replaced, the Test mode settings are all cleared. Make
z
the volume settings and initialize the analog interfaces. (See "7-8 Test Mode" on page
38.)
- Must be performed by a technician -
Game PC board
Phillips pan head screw
(with flat and split washers)
(M4 x 8)
Game PC board
8b. Service
Phillips pan head screw
(with flat and split washers)
(M4 x 8)
Cable stay
109
16/03/22 19:54
1
2
3
4
5
6
7
8A
8B
9
10
11
12