Critical Safety Precautions - Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual

1. Safety precautions – be sure to read to ensure safe operation –
1-3

Critical Safety precautions

z Should an abnormality occur, turn off the power switch immediately to stop operations. Then, be sure
z
to disconnect the power cord plug from the outlet.
Operating the machine while the abnormality persists may result in fire or accident.
z Dust accumulating on the power cord plug may result in fire. Inspect the plug regularly and remove z
any dust.
z Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in fire or
z
burns.
z Damage to the power cord may result in fire, electric shock or electrical leakage. Be sure to observe
z
the following.
• Keep the power cord away from heaters.
• Do not twist the power cord.
• Do not forcibly bend the power cord.
• Do not alter the power cord.
• Do not bundle the power cord.
• Do not pull the power cord. ( Always unplug by holding the plug and not the power cord.)
• Do not place objects on the power cord.
• Do not allow the power cord to be caught between the machine and other devices or the wall.
• Do not do anything else that might damage the power cord.
z Do not expose the power cord and power cord plug to water. It may result in electric shock or electri-
z
cal leakage.
z Do not touch the power cord plug with wet hands. It may result in electric shock.
z
z The power capacity of the machine is AC 100 v (or AC 220 v), maximum current consumption 4.8 A. To z
prevent fire and electric shock, use indoor wiring that conforms to these power supply specifications.
z Use a power supply voltage range of AC 90 v to 110 v (or AC 220 v). Using a voltage outside this range z
may result in fire or electric shock. However, to ensure that the machine operates in the optimum
condition, keep the voltage at AC 100 v (or AC 220 v) as much as possible.
z To ensure safe use of the machine, be sure to perform the pre-operation inspection (See "7-3 pre-
z
operation Inspection" on page 21) and service (See "8b Service" on page 90).
Omitting these inspections or service may result in an accident.
zz Use the consumables and service parts (including screws) that are specified by BANDAI NAMCO
Amusement Inc.
To order parts, contact your distributor.
zz Do not modify the machine without permission. Do not perform any operations that are not described
in this Operation Manual. Modifying the machine may create unforeseen hazards.
2
WMT5DX取扱説明書_EN.indb 2 16/03/22 19:53