Moving And Transporting; Moving (On The Same Floor) - Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual

6. Moving and Transporting

z Do not leave the machine on a slope. It may fall over or result in an accident.
z
z When transporting the machine, be sure to use two or more people. Attempting to move the machine z
with fewer people may cause the machine to fall over or result in an accident.
6-1

Moving (On the Same Floor)

16
WMT5DX取扱説明書_EN.indb 16
z be sure to turn off the power switch before starting work. z
z Move the machine carefully to avoid subjecting it to impact. (The lCD monitor is a
z
precision electronic part.)
z Even when moving the machine only a short distance, be sure to raise the level
z
adjusters to their highest level. (See "8A-2 level Adjuster Adjustment" on page 81.)
z Handle the lAN cables and power cord carefully. be especially careful when
z
connecting and disconnecting the lAN cable connectors. (See "8A-3 Connecting the
power Cord and Ground" on page 82 and "8A-4 Connecting the lAN Cables" on
page 83.)
16/03/22 19:53