Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual page 79

Signboard assembly
WMT5DX取扱説明書_EN.indb 77
3
Disconnect the connector on top of the monitor assembly, open the arm of the locking clamp,
and push the cable into the signboard assembly side.
4
Remove the two flange socket bolts (M8 x 20).
5
pull the signboard assembly forward and remove it from the guide rails.
6
To install, perform the procedure in reverse.
8A. Installation and Assembly
- Must be performed by a technician -
Signboard assembly
Locking clamp
Connector
Flange socket head bolt (M8 x 20)
1
2
3
4
5
6
7
8A
8B
9
10
11
12
77
16/03/22 19:54