Safety - Bandai Namco GALAGA ASSAULT Setup And Operation Manual

Safety

O
PERATION
Before operating game, read this manual. Failure to properly install and operate this game could result in
malfunction or accident. Operate the game in accordance with the manual.
T
RANSPORTING
The cabinet is very heavy. Because the monitor is high, the cabinet is also very top‐heavy. Use appropriate care
when moving or transporting cabinet. It contains fragile glass and electronic components. Avoid rough handling.
H C
ANDLING OMPONENTS
Many components are extremely sensitive to handling, environmental and Electrostatic Discharge (ESD) events—
especially the computer. Do not handle it roughly. Before servicing, call your distributor and inquire about the PC
warranty. Use proper ESD procedures when servicing. Protect components from harmful environmental
conditions, such as extreme temperatures, excessive moisture or other damaging effects.
D
ISCONNECT POWER
Always turn the power off and unplug the unit before servicing or making adjustments unless otherwise instructed.
Installing or repairing components while power is on can damage the components and void the warranty.
G
ROUNDING
Avoid electrical shock. Do not plug in AC power until you have inspected and properly grounded the unit. Only plug
into a grounded, three‐wire outlet. Do not use a "cheater" plug or cut off the ground pin on the line cord.
E S
LECTRICAL HOCKS
There is no isolation transformer in the cabinet. Disconnect AC power before servicing. However, be aware that
lethal voltages can remain in the electronic components even when AC power is disconnected. Use extreme
caution when servicing. Verify that there is a working ground connection. If the unit sustains water damage, cease
using it immediately and unplug AC power.
M
ONITOR
The monitor contains no user serviceable parts. Do not attempt to service the monitor.
P S
OWER ELECTOR
Before installing game, ensure the voltage on the PC and power supply is set properly. There is a 115/230 VAC
selector switch that must be set for the correct voltage for your site. Verify the fluorescent lamp rating. The rating
must match the line voltage at the installation site.
P C
OWER ORD
If the power cord is damaged or lost, replace it with an identical cord as supplied by the manufacturer or an
authorized service agent.
S S
URGE UPRESSOR
It is recommended that you plug your game's power cord into a surge suppressor to help protect from power
surges that may damage sensitive electronic components.
GALAGA ASSAULT ™ & © BANDAI NAMCO ENTERTAINMENT Inc.
2