Table of Contents
Advertisement
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press OK in viewing mode to display the channel list. Use p/q to highlight your channel of choice
and press OK once to select the highlighted channel. The channel list is equipped with a Find function
to make it easier to find channels. In the channel list, press RED and an alphabet banner will be
displayed. Use p/q tu to select the first letter (or letters) of your channel of choice and select OK
to confirm or just press . All channels beginning with the chosen letter(s) will now be displayed.
Select the channel in the filtered list.
The following buttons are available in the channel list and in viewing mode:
RED:
TV/R:
4
6.1.3 Using the
p
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 Using the 9 button
Use the 9 button for switching between the last 8 viewed channels. Please refer to section 7.6 for
more details.
6.2 Info Banner
At any time during viewing mode you can press the INFO button to get information about the
current channel as well as the current and following programme*. Press INFO twice to view detailed
info of current and following programmes and technical details about the current channel. Press
INFO again or to close the information.
You can change the on-screen duration of the info banner in the System menu. Please refer to section
7.5 for more details.
*Programme information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use
p/q to select a stream and confirm with OK. With the tu buttons you can choose between Mono
left, Mono right or Stereo audio (left/right).
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TEXT button in viewing
mode and use the 0~9 or p/q buttons to select the number of the page you wish to see. Subpages
(if loaded and available) can be selected with the tu buttons. The coloured buttons of the remote
10
Opens an alphabet banner to quickly find a channel
Toggles between TV and radio channels
Opens the Satellite List for satellite selection
/
buttons
q
Advertisement
Table of Contents
