Table of Contents
Advertisement
LNBs in the right-hand screen by pressing u at the DiSEqC 1.0 or, if applicable, DiSEqC 1.1 option. The
scan process will then search on all selected satellites. If using motorized antennas or SatCR, please
refer to chapter 7.
4.1.2 Signal Adjust
The signal Strength and Quality bar on the bottom of the screen allows you to fine tune the
alignment of your antenna for optimum reception. Adjust your antenna for maximum possible signal
strength and quality. When the signal cannot be improved anymore, fix the dish on this position and
press the BLUE button for Scan options and scan.
4.1.3 Scan Mode
Use p/q to highlight the options of choice and press BLUE to start the scan. It is recommended to
use the default settings.
4.1.4 Scan
Your receiver will now perform an automatic channel search. When the process has been completed,
all found channels will be stored and the receiver will switch to the first found channel. You are now
ready to enjoy your new receiver.
NOTE
5.0 QUICK GUIDE FOR USING YOUR RECEIVER
We at STRONG understand that you can't wait to enjoy your new HD receiver. The following quick
guide will make you familiar with the basic operation of this device. We do, however, advice you to
read the full manual to get the best performance from your STRONG HD receiver.
To turn your receiver ON or to Standby, press q on the remote control.
Choose channels with p/q. Alternatively, you can also enter the channel number with the 0~9
buttons on the remote control or press OK in viewing mode to display the channel list.
The volume can be adjusted with tu.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7 to get familiar with the menu of your new
receiver.
6.1 Changing channels
There are different ways to change channels with your new receiver.
Via direct access
n
Via the channel list
n
Via the p/q buttons
n
Via the 9 button
n
If no channels were found during the automatic channel scan, the receiver
will return to Installation guide menu. Please select your language again
and refer to chapter 7.3 for further instructions.
9
Advertisement
Table of Contents
