Picture - Strong SRT 7008 User Manual

7.2 Picture

Press MENU, then select Picture. The menu provides options to adjust the video settings. Press p/q
to select an option and tu to adjust the setting. Press  to exit the menu.
Aspect Ratio
You can set the display format to available settings like 16:9 Widescreen, 16:9 Pillarbox, 4:3 Letterbox,
4:3 Pan&Scan.
16:9 Widescreen
16:9 Pillarbox
4:3 Letterbox
4:3 Pan&Scan
TIP
Resolution
If the video does not appear correctly, change the setting. These settings match the most common
settings for HDMI.
1. 480i:
2. 480p:
3. 576i:
4. 576p:
5. 720p:
6. 1080i:
7. 1080p:
TIP
TV Format
Set the standard corresponding to your TV set. Available options are: PAL and NTSC.
Video Output
This setting is only relevant when the receiver is connected to the TV set via Scart. Select RGB for the
best picture quality or CVBS if your TV doesn't support RGB.
14
For 16:9 TV screens. All programmes will fill the full screen. Content
formatted in 4:3 will be stretched.
For 16:9 TV screens. The unit will display all content in its original aspect ratio.
Programmes formatted in 4:3 will be presented with black bars on the left
and right.
For 4:3 TV screens. The unit will display all content in its original aspect ratio.
Programmes formatted in 16:9 will be presented with black bars on the top
and bottom.
For 4:3 TV screens.16:9 content will have the extreme left and right portions
cut off and presented full screen.
You can change the video output format directly from viewing mode by
pressing the YELLOW button on the remote control.
for NTSC system TV.
for NTSC system TV.
for PAL system TV.
for PAL system TV.
for NTSC or PAL system TV.
for NTSC or PAL system TV.
for NTSC or PAL system TV.
You can change the video resolution directly from viewing mode by
pressing the GREEN button on the remote control.